ANALOGUE to ANALOGUE CONVERTERS
AAA-3780:
Balanced-Unbalanced / Unbalanced-Balanced Audio Interface Amplifier.
User configurable.
Unbalanced to Balanced, or Balanced to Unbalanced.
High common mode rejection.
Wide gain range.
High packaging density.
ANALOGUE to DIGITAL CONVERTERS
AAC-3390:
Analogue Audio Stereo to AES Converter.
Balanced stereo inputs.
High impedance or 600 Ohm input termination.
AES external reference input.
Balanced 110 Ohm or unbalanced 75 Ohm AES output rear assembly options.
Front panel AES monitoring point.
DVC-4360:
Composite to 270Mb/s SDI Converter.
Configurable for Composite, YPbPr or YC video inputs.
PAL or NTSC operation with auto switching.
2 SDI 270Mb/s outputs.
2 AES or 4 Analogue Audio Inputs.
Group 1 - SMPTE 272M-A synchronous 48 kHz audio insertion.
Video input indicator on front panel.
DIGITAL to ANALOGUE CONVERTERS
DAC-4412:
AES Distribution Amplifier with Analogue Monitoring.
2 balanced AES, 2 unbalanced AES and 2 analogue stereo outputs.
24 bit digital to analogue processing.
75 and 110 Ohm inputs.
Front panel digital monitoring output.
Front panel audio level and AES error indications.
All inputs and outputs transformer coupled.
Digital circuit re-shapes output and restores level.
No cable compensation adjustments required.
Optional plug-in SNMP monitoring module.
DVC-4112:
270 Mb/s SDI to Composite Converter & DA.
Broadcast quality, full 10-bit video conversion.
4 equalised, regenerated and re-clocked repeater outputs.
3 Composite analogue outputs with high quality 10 bit D to A.
Component (RGB, YPbPr) or S-Video (Y/C) output.
PAL or NTSC operation with auto or manual switching.
SDI input loss and decoded video indicators on front panel.
Simple Network Management Protocol (SNMP) capability.
AUDIO INSERTERS (Embedders)
DAI-4207:
3G/HD/SD-SDI Audio Inserter.
Standard 75 Ohm 3G/HD/SD-SDI video input and outputs.
Supports 3G and all HD & SD video line and frame rate standards.
Inserts audio signals into 2 selectable groups.
Eight high quality analogue audio inputs; or
Four 110 Ohm balanced AES inputs, or optionally four 75 Ohm unbalanced AES inputs.
20 bit and 24 bit audio supported.
Z, C, U data preserved.
Select between AES or Analogue audio inputs.
48 kHz AES resampling.
Ability to replace existing embedded audio.
Indicators for presence of SDI & audio inputs.
External alarm for loss of carrier.
Selectable 3G, HD & SD SDI generator outputs colour black, blue green or yellow test
signal on loss of SDI input.
Selectable tone generator inserts audio test signals within set audio groups.
Cascadable - Two SDI outputs for connection to additional units.
Simple Network Management Protocol (SNMP) capable.
