![]() ![]() ![]() ![]() ![]() ![]() |
IRT-6638-DDT & IRT-6638-DDR:
8-Channel 3G/HD/SD-SDI/ASI Fibre Optic Link | ||
FEATURES:
|
||
GENERAL:
|
||
The IRT-6638-DDT and IRT-6638-DDR are 8-channel transmit and receive modules designed principally for use as eight serial
data fibre optic transmission links on a single fibre for 3G-SDI, HD-SDI or SD-SDI applications conforming to SMPTE
standards 424M, 292M and 259M-C using 9/125 µm single mode fibre. This enables the use of space saving fibre optic cable for
reliable transmission of digital video signals over lengths greater than can be achieved with coaxial cable. | ||
TECHNICAL SPECIFICATIONS:
|
||
IRT-6638-DDT: |
|
Input serial data signal |
2.97 Gb/s (3G-SDI) to SMPTE 424M; 1.485 Gb/s (HD-SDI) to SMPTE 292M; 270 Mb/s (SD-SDI) to SMPTE 259M-C and DVB-ASI. |
Input Impedance |
75 Ω. |
Input Return Loss |
> 15 dB 5 MHz to 1.5 GHz; > 10 dB 1.5 GHz to 2.97 GHz. |
Automatic Cable Compensation |
> 100 m at 2.97 Gb/s (3G-SDI) with Belden 1694A (typ. 110m);; > 100 m at 1.485 Gb/s (HD-SDI) with Belden 1694A (typ. 160m); > 250 m at 270 Mb/s (SD-SDI/ASI) with Belden 8281 (typ. >300m). |
Input Connector |
8 x BNC on rear panel, 1 per channel. |
IRT-6638-DDR: |
|
Number of Outputs |
1 per channel, data reclocked, AC coupled. |
Output Level |
800 mV ± 10%. |
Output Impedance |
75 Ω. |
Output Return Loss |
> 15 dB 5 MHz to 1.5 GHz; > 10 dB 1.5 GHz to 2.97 GHz. |
Output Rise and Fall Time |
< 135 ps at 2.97 Gb/s and 1.485 Gb/s; > 0.4 ns and < 1.5 ns at 270 Mb/s. |
Intrinsic Jitter |
< 0.3 UI at 2.97 Gb/s reclocked; < 0.2 UI at 1.485 Gb/s reclocked; < 0.1 UI at 270 Mb/s reclocked. |
Output Connector |
8 x BNC on rear panel, 1 per channel. |
Optical: |
|
IRT-6638-DDT Optical Output |
0 dBm +4.5/-0 dB CWDM DFB laser. |
IRT-6638-DDR Optical Input |
APD detector, -5 to -24 dBm input level at 3G-SDI, typically < -27 dBm at HD/SD-SDI. |
Available Wavelengths |
CWDM DFB lasers - 1470nm, 1490nm, 1510nm, 1530nm, 1570nm, 1590nm, 1610nm. |
Optical Path Loss2 |
APD detectors, 5 to 24 dB at 3G-SDI, typically >27 dB at HD/SD-SDI. PIN detectors,0 to 14 dB at 3G-SDI, typically >17 dB at HD/SD-SDI. (Optical path loss = Laser O/P power - Detector I/P power) |
Optical Fibre |
Designed for use with 9/125 µm single mode fibre. |
Optical Connector |
1 x SC/PC (standard) on rear - direct connection to main card. |
Power Requirements: |
|
Voltage |
+ 12 Vdc. |
Power consumption |
IRT-6638-DDT < 19VA, IRT-6638-DDR < 14VA. |
Other: |
|
Temperature range |
0 - 50°C ambient. |
Mechanical |
Suitable for mounting in an openGear® 2RU rack chassis. |
Dimensions (openGear® standard) |
33.6 mm x 2U x 325 mm. |
Supplied accessories |
Rear connector assembly. |
Ordering |
IRT-6638-DDT |
IRT-6638-DDT, fitted with 1470-1610nm DFB lasers and on-board 8-channel CWDM combiner, programmed with DashBoard™ control. |
IRT-6638-DDR |
IRT-6638-DDR,fitted with APD detectors and on-board 8-channel CWDM de combiner, programmed with DashBoard™ control. |
|
IRT-6638-DDR/PIN |
IRT-6638-DDR, fitted with PIN detectors and on-board 8-channel CWDM de combiner, programmed with DashBoard™ control. |
|
NOTE 2: |
Typical values based using DFB laser. Optical attenuator supplied for IRT 6638 DDR when optical path loss is less 5dB for APD detector. |
![]() ![]() |
IRT-6638-DDT
IRT-6638-DDR |
Due to our policy of continuing development, these specifications are subject to change without notice.
|