IRT-6080-DVS:   3G/HD/SD-SDI / ASI Digital Video Switcher & Router

FEATURES:

      3G-SDI, HD-SDI, SD-SDI or ASI capable.
      8x1 or dual 4x1 switching operation.
      8x2 or 4x2 router setup.
      Automatic muting on loss of inputs.
      Front edge local control with remote control option.
      DashBoard™ software monitoring and control.

Brochure  

User Manual  

GENERAL:

The IRT 6080-DVS digital video switcher is part of a family of "smart" switchers in openGear® format that may be configured by the user to cover a wide range of switching and monitoring functions.

On board configuration is possible to allow the IRT-6080-DVS to be used as an 8x1 switcher with 2 common outputs; a dual independent 4x1 switcher; an 8x2 or 4x2 router.

Push-button switches along the front edge provide local control, although control is usually intended via a software interface such as DashBoardTM.

Optionally remote control is via a momentary wire per crosspoint (WPX) control connector allowing interface to a remote control panel or a telemetry system, or alternatively an RS232 remote control is also available providing extended control.

Front edge switches can be disabled for tally indication only so as to prevent accidental switching when intending only to use one of the remote control options.

The IRT-6080-DVS is designed to fit the openGear® standard 2RU frames which allow a mixture of cards from various manufacturers to be mounted within the same frame.

The DashBoard™ control software is available as a free download.

TECHNICAL SPECIFICATIONS:

Signal Inputs:
Number
8.
Type
3G-SDI, HD-SDI, SD-SDI or ASI.
Automatic Cable
      Compensation
> 100 m at 2.97 Gb/s (3G-SDI) with Belden 1694A;
> 100 m at 1.485 Gb/s (HD-SDI) with Belden 1694A;
> 250 m at 270 Mb/s (SD-SDI/ASI) with Belden 8281.
Impedance
 75 Ω

Signal Outputs:
Type
2 x 800 mV ± 10% into 75 Ω.

Control Inputs:
Type 1
Momentary wire per crosspoint (WPX) grounding contacts
(Front edge push button switches or optional remote control panel).
Type 2
openGear® DashBoardTM software.
Type 3
RS-232 (9600bps, 8 data bits, No parity, 1 Stop bit, No flow control)
(optional IRT-RC2 remote control panel).

Performance:
Return loss
15dB 5 MHz to 1.485 GHz,
10dB from 1.485 GHz to 2.97 GHz.
DC Offset
0 V ± 0.5 V.
Output rise and fall time
< 135 ps at 2.97 Gb/s and 1.485 Gb/s;
> 0.4 ns and < 1.5 ns at 270 Mb/s.
Intrinsic jitter
< 0.3 UI at 2.97 Gb/s reclocked;
< 0.2 UI at 1.485 Gb/s reclocked;
< 0.1 UI at 270 Mb/s reclocked.

Power Requirements:
Voltage
+ 12 Vdc.
Power consumption
< 5VA.

Connectors:
3G/HD/SD-SDI / ASI
BNC.
Control (with remote option)
Plug in 10 pin HE14 dual IDC, DB9 or DB15.

Other:
Temperature range
0 - 50°C ambient.
Mechanical
Suitable for mounting in an openGear® 2RU rack chassis.
Dimensions (openGear® standard)
33.6 mm x 2U x 325 mm;
(67.3 mm x 2U x 325 mm with remote option rear assembly).

Supplied Accessories
Rear connector assembly.

Optional Accessories
IRT-RC1 remote control panel with 8 pushbuttons & tally LED's.
IRT-RC2 RS-232 remote control panel with 2 x 8 (16) pushbuttons & tally LED's.

Ordering
IRT-6080-DVS
Standard, programmed with DashBoard™ control.
IRT-6080-ZRC
Dual width rear assembly with remote control interfaces.
IRT-RC1
Remote control panel with 8 pushbuttons & tally LED's.
IRT-RC2
RS-232 remote control panel with 2 x 8 (16) pushbuttons & tally LED's.
IRT-RP1
1RU 19" rack mounting plate for IRT-RC1 and IRT-RC2 remote control panels.




           

IRT-6080-DVS                                 IRT-6080-ZRC                                       IRT-RC1                         IRT-RC2


IRT-RP1 fitted with IRT-RC1 and IRT-RC2
Due to our policy of continuing development, these specifications are subject to change without notice.